Table of Contents
Advertisement
Drivers Required
For Windows 2000 Installation, the following device drivers are required.
Device
Onboard ATI
Radeon 7000 VGA
Onboard Intel
E8501 Chipset
Integrated SAS
hardware RAID
Onboard LSI 1030
SCSI Controller
Onboard Broadcom
BCM5704 Gigabit
Ethernet
Onboard USB 2.0
SAS Hot-swap
backplane
Software Required
The management utility for Integrated SAS hardware RAID and NIC can be
found in the EasyBUILD 7.1 build 300 (or later).
Software
Intel RAID Web
Console 2
Broadcom
Advanced Control
Suite
Microsoft DirectX
Configuring integrated SAS hardware RAID
Please refer to the Appendix B. for the integrated SAS hardware RAID
configuration.
Installation Tips
NOTE. There is no built-in driver for integrated SAS hardware RAID in the OS.
You need an USB floppy for applying driver during the OS installation.
As Windows 2000 can't recognize the integrated SAS hardware RAID, you
1.
need to make a driver diskette from the EasyBUILD 7.1 build 300 first
before the installation.
Press F6 at the start of installation to provide the driver diskette.
2.
Select "Intel SAS RAID Controller Driver (Windows 2000)" as target driver
3.
31
Version
Directory on EasyBUILD
8.221.0.0
\Disk\R910\onboard\VGA
7.2.2.1001
\Disk\R910\onboard\Chipset
1.17.0.32
\Disk\R910\raid\Integrated_SAS\w2k
1.9.11.0
\Disk\R910\onboard\SCSI\LSI\ultra320.
w2k
8.93.1.0
\Disk\R910\NIC\BCM\bcm_5704.w2k
7.2.2.1001
The USB 2.0 driver is in the same
package with chipset driver.
5.0.6055.2
\Disk\r910\onboard\hsbp\sas\Windows\
Version
Directory on EasyBUILD
1.13-07
\app\r910\Integrated_SAS\Windows\
7.7.6
\APP\R910\NIC\BACS\2KXPWS03
8.0 or later
http://www.microsoft.com/windows/di
rectx/default.mspx
Altos R910 Installation Configuration Guide
Advertisement
Table of Contents
