Table of Contents
Advertisement
5.
Insert the right end of the bar into the hole near the hard disk
drive frame and the left end into the hole on the rear panel.
Left End
LVD SCSI Backplane Board
The LVD SCSI hot-swap cage includes a hot plug SCA single-ended
backplane, LED board, and the hard drive cage itself. It supports
three 1-inch SCA-II SCSI hard drives in one channel with active
terminator built-in.
The SCA II connector design allows for the
addition and removal of SCSI drives without shutting down the system.
System Housing
Right End
1-17
Advertisement
Table of Contents
