Table of Contents
Advertisement
Select "LSI Logic MegaRAID SAS 8708ELP RAID Controller
5.
(A:\oemsetup.inf)" and click on Next.
Please hold the ctrl key to select all of listed driver and click on Next to
6.
load the driver.
After the driver is loaded and returned to "Where do you want to install
7.
Windows?" page, click on Next to continue the installation.
Follow the instructions to finish the installation.
8.
Chipset Driver Installation
Though Windows Server 2008 x64 has built-in driver for onboard chipset
1.
and can recognize the onboard gigabit Ethernet controller, we still need
to replace the driver with the one in EasyBUILD.
After the installation completes, you would see the following devices in
2.
Device Manager without any yellow mark.
Please insert the EasyBUILD 8.0 build 200 into the optical drive
3.
Expand Drivers -> Altos G5450 -> Chipset, select Windows Server 2008 x64
4.
and click on Setup.
Follow the instruction and use the default setting to install all of the
5.
9
Altos G5450 Installation Configuration Guide
Advertisement
Table of Contents
