Table of Contents
Advertisement
Altos R910 Installation Configuration Guide
during the OS installation.
Please make the driver diskette from the EasyBUILD 7.1 build 600 first
1.
before the installation.
Boot the system form SUSE Linux Enterprise Server 10 EM64T bootable CD.
2.
When you see the boot menu on the screen, press F5 and select Yes.
3.
Please insert the driver disk into the floppy drive then press Enter to
4.
continue the installation.
Follow the instruction to complete the installation.
5.
SUSE Linux Enterprise Server 9 Service Pack 3 (with Integrated
SCSI Hardware RAID)
Below information describes how to manually install SUSE Linux Enterprise
Server 9 Service Pack 3 on Altos R910 with integrated SCSI hardware RAID.
Drivers Required
For SUSE Linux Enterprise Server 9 Service Pack 3 Installation, the following
device drivers are required.
Device
Onboard ATI
Radeon 7000 VGA
Onboard Intel
E8501 Chipset
Integrated SCSI
hardware RAID
Onboard Broadcom
BCM5704 Gigabit
Ethernet
Onboard USB 2.0
Hot-swap
backplane
Software Required
The management utility integrated SCSI hardware RAID can be found in the
EasyBUILD 7.1 build 100 (or later).
Software
Intel RAID Web
Console
Configuring Integrated SCSI Hardware RAID
Please refer to the Appendix A. for the integrated SCSI hardware RAID
configuration.
50
Version
Directory on EasyBUILD
N/A
Built-in
N/A
Built-in
2.20.4.6
Built-in
3.37
Built-in
N/A
Built-in
N/A
Built-in
Version
Directory on EasyBUILD
2.8-00
\app\r910\romb\IntelRAIDWebConsole
\linux\
Advertisement
Table of Contents
