Table of Contents
Advertisement
Altos R910 Installation Configuration Guide
Maintenance Pack 2 Installation
Please download the Maintenance Pack 2 form SCO website and burn the
1.
image to a CD.
Please launch the Software Manager.
2.
Select Software -> Install New -> From scosysv (your system name) -> CD-
3.
ROM Drive 0.
Select SCO OpenServer Release 6.0.0 Maintenance Pack 2 (ver 1.0.0Dy) to
4.
install.
When the installation completed, please reboot the system.
5.
# shutdown –g0
Gigabit Ethernet Driver Installation
There is built-in driver for onboard BCM5704 Gigabit Ethernet controller in
OpenSrever 6.0.0. Please just Launch netcfg utility and select Hardware -> Add
new LAN adapter to add the adapters and set the network settings.
# netcfg
62
Advertisement
Table of Contents
