Table of Contents
Advertisement
Altos R910 Installation Configuration Guide
CIM Browser Installation
Please insert the EasyBUILD 7.1 build 100 into the optical drive.
1.
Select Utilities, expand Utilities -> Altos R910 -> LSI Logic 53C1030 U320
2.
SCSI, select CIM Browser (Windows Server 2003 x64) and click on Setup.
Follow the instructions to complete the CIM Browser installation.
3.
Broadcom Advanced Control Suite Utility Installation
The Broadcom Advanced Control Suite Utility installation is the same as
integrated SCSI hardware RAID enabled. Please refer to the Windows Server
2003 Enterprise x64 Edition (with Integrated SCSI Hardware RAID) Broadcom
Advanced Control Suite Installation section.
Windows Server 2003 Enterprise x64 Edition SP1 (with
Integrated SAS Hardware RAID)
Below information describes how to manually install Windows Server 2003
Enterprise x64 Edition on Altos R910 with integrated SAS hardware RAID.
Drivers Required
For Windows Server 2003 x64 Installation, the following device drivers are
required.
Device
Onboard ATI
Radeon 7000 VGA
Onboard Intel
E8501 Chipset
Integrated SAS
hardware RAID
Onboard LSI 1030
SCSI controller
Onboard Broadcom
BCM5704 Gigabit
Ethernet
Onboard USB 2.0
SAS Hot-swap
backplane
Software Required
The management utility for integrated SAS hardware RAID and NIC can be
found in the EasyBUILD 7.1 build 300 (or later).
Software
Intel RAID Web
Console 2
Broadcom
12
Version
Directory on EasyBUILD
6.14.10.6553
\Disk\R910\onboard\VGA
5.2.3790.1380
Built-in
1.17.0.64
\Disk\r910\raid\Integrated_SAS\ws2k3x
64\
5.2.3790.1380
Built-in
8.48.0.0
\Disk\r910\nic\bcm\WS2003X64\
5.2.3790.1380
Built-in
5.0.6055.2
\Disk\r910\onboard\hsbp\sas\
Version
Directory on EasyBUILD
1.13-07
\app\r910\Integrated_SAS\Windows\
7.7.7
\app\r910\NIC\BACS\WS3XPx64\
Advertisement
Table of Contents
