Table of Contents
Advertisement
Software Required
The management utility for integrated SCSI hardware RAID and NIC can be
found in the EasyBUILD 7.1 build 100 (or later)
Software
Intel RAID Web
Console
Broadcom
Advanced Control
Suite
Configuring Integrated SCSI Hardware RAID
Please refer to the Appendix A. for the Integrated SCSI hardware RAID
configuration.
Installation Tips
NOTE. There is no built-in driver for Integrated SCSI hardware RAID in the OS.
You need an USB floppy for applying driver during the OS installation.
As Windows Server 2003 can't recognize the integrated SCSI hardware
1.
RAID, you need to make a driver diskette from the EasyBUILD 7.1 build
100 first before the installation.
Press F6 at the start of installation to provide the driver diskette.
2.
Select "Intel (R) RAID Controllers For Windows 2003" as target driver
3.
After loading the RAID driver from diskette, follow the normal procedure
4.
to finish the installation.
VGA Driver Installation
Please insert the EasyBUILD 7.1 build 100 into the optical drive.
1.
Expand Drivers -> Altos R910 -> Graphics adapters -> ATI Radeon 7000,
2.
select Windows Server 2003 and click on Setup.
Follow the instruction to install the VGA driver and reboot the server
3.
after the driver is installed.
Gigabit Ethernet Driver Installation
There are two Ethernet Controller listed under Other device in Windows
1.
Device Manager. Please do the same on both of the devices.
17
Version
Directory on EasyBUILD
2.8-00
\app\r910\romb\IntelRAIDWebConsol
e\windows
7.7.6
\app\r910\NIC\BACS\2KXPWS03
Altos R910 Installation Configuration Guide
Advertisement
Table of Contents
