Scsi Driver Installation; Vga Driver Installation; Gigabit Ethernet Driver Installation; Intel Raid Web Console 2 Utility Installation - Acer Altos R910 Installation & Configuration Manual

Hide thumbs Also See for Altos R910:
Table of Contents

Advertisement

SCSI Driver Installation

Although the Windows Server 2003 Enterprise Edition could detect the
onboard SCSI automatically, we still replace the driver with the one in the
EasyBUILD 7.1 build 300 DVD.
Please right-click on the LSI Logic PCI-X Ultra320 SCSI Host Adapter in
1.
Windows Device Manager and select Update Driver to update onboard
LSI Logic 1030 U320 SCSI driver.
Select No, not this time. Do not connect to Windows Update to search the
2.
driver.
Select Install from a list or specific location (Advanced).
3.
Select Search the best driver these locations and check Include this
4.
location in the search.
Click on Browse and specify the path for the driver. Please refer to the
5.
Directory on EasyBUILD 7.1 build 300 for Hot-swap backplane driver in
Driver required section.
Click on Next and follow the instruction to finish the driver update.
6.
After installing the driver, you would see LSI Logic 1020/1030 Ultra320
7.
SCSI Adapter listed in SCSI and RAID controllers.

VGA Driver Installation

The VGA driver installation is the same as integrated SCSI hardware RAID
enabled. Please refer to the Windows Server 2003 Enterprise Edition (with
Integrated SCSI Hardware RAID) VGA Driver Installation section.

Gigabit Ethernet Driver Installation

The Gigabit Ethernet Driver installation is the same as integrated SCSI
hardware RAID enabled. Please refer to the Windows Server 2003 Enterprise
Edition (with Integrated SCSI Hardware RAID) Gigabit Ethernet Driver
Installation section.

Intel RAID Web Console 2 Utility Installation

Please insert the EasyBUILD 7.1 build 300 into the optical drive.
1.
Expand Utilities -> Altos R910 -> Integrated SAS Hardware RAID, select
2.
Intel RAID Web Console 2 and click on Setup.
Follow the instruction, accept the license agreement and use the default
3.
setting to the Setup Type.
At the Setup Type, please select StandAlone.
4.
Follow the instruction again to complete the installation.
5.
23
Altos R910 Installation Configuration Guide

Advertisement

Table of Contents
loading

Table of Contents