Table of Contents
Advertisement
OS INSTALLATION TIPS
Altos R910 Installation Configuration Guide
Below is Altos R910 OS certification matrix:
Operating System
Windows 2000 Advanced Server
Windows Server 2003 Enterprise
Edition
Windows Server 2003 Enterprise x64
Edition
Red Hat Enterprise Linux 4.0 Update 3
Red Hat Enterprise Linux 4.0 EM64T
Update 3
SuSE Linux Enterprise Server 9 SP3
SuSE Linux Enterprise Server 9 EM64T
SP3
SuSE Linux Enterprise Server 10
SuSE Linux Enterprise Server 10 EM64T
The drivers required for the OS installation can be found on the EasyBUILD 7.1
build 100. We suggest that you use the drivers contained in the EasyBUILD 7.1
build 100, as these drivers are tested and qualified by Acer.
There are two ways you can get the drivers. You can either make diskettes
from Resource CD, or put the Resource CD in the CD-ROM drive and search the
driver directly from the Resource CD.
NOTE. In this section, we assume the OS is installed on the HDD connected to
the onboard SCSI or integrated SCSI hardware RAID.
NOTE. You need an USB floppy for applying driver during OS installation if
there is no built-in driver for disk controller driver in the OS.
Windows Server 2003 Enterprise x64 Edition SP1 (with
Integrated SCSI Hardware RAID)
Below information describes how to manually install Windows Server 2003 x64
Edition on Altos R910 with integrated SCSI hardware RAID.
Drivers Required
For Windows Server 2003 x64 Installation, the following device drivers are
required.
Device
Onboard ATI
Radeon 7000 VGA
Onboard Intel
E8501 Chipset
Integrated SCSI
hardware RAID
8
Status
Tested
Certified
Certified
Certified
Certified
Certified
Certified
Tested
Certified
Version
Directory on EasyBUILD
6.14.10.6553
\Disk\R910\onboard\VGA
5.2.3790.1380
Built-in
6.45.3.64
\Disk\R910\onboard\romb\x64\romb.ne
t
Note
Advertisement
Table of Contents
