Table of Contents
Advertisement
Type linux dd when the prompt boot: appears at the start.
2.
Please select the sda as the Driver Disk Source.
3.
Follow the instruction to load the integrated SAS hardware RAID driver
4.
from the driver diskette.
After loading the driver for integrated SAS RAID, please follow the
5.
normal procedure to finish the installation.
Intel RAID Web Console 2 Installation
You can find the Intel RAID Web Console 2 in EasyBUILD 7.1 build 300.
1.
Please refer to Software Required section for the directory of the Intel
RAID Web Console 2 on EasyBUILD and copy the utility from the
EasyBUILD 7.1 build 300 to HDD first.
# mount /media/cdrom
# cp –R /media/cdrom/app/r910/Integrated_SAS/Linux/. /tmp
Install Intel RAID Web Console 2 utility
2.
# cd /tmp/
# ./install.sh
Type y to accept the license agreement and select 3 for StandAlone
3.
installation.
To start Intel RAID Web Console 2, select applications -> System Tools ->
4.
RAID Web Console 2 Startup UI
CIM Browser Installation
The CIM Browser installation is the same as onboard LSI SCSI. Please refer to the
Red Hat Enterprise Linux 4 Update 3 (with onboard LSI SCSI) CIM Browser
Installation section.
Red Hat Enterprise Linux 4.0 Update 3 (with Integrated SAS)
Below information describes how to manually install Red Hat Enterprise Linux
4.0 update 3 on Altos R910 with integrated SAS.
Drivers Required
For Red Hat Enterprise Linux 4.0 Update 3 Installation, the following device
drivers are required.
Device
Onboard ATI
Radeon 7000 VGA
Onboard Intel
E8501 Chipset
Integrated SAS
39
Version
Directory on EasyBUILD
N/A
Built-in
N/A
Built-in
3.02.77
\Disk\r910\onboard\SAS\rhel4u3\
Altos R910 Installation Configuration Guide
Advertisement
Table of Contents
