Table of Contents
Advertisement
Please insert the EasyBUILD 7.1 build 100 into the optical drive.
2.
Expand Drivers -> Altos R910 -> Chipset, select Windows 2000 Advance
3.
Server and click on Setup.
Follow the instruction to install the driver and reboot the server after the
4.
chipset driver is installed.
Gigabit Ethernet Driver Installation
There are two Ethernet Controller listed under Other device in Windows
1.
Device Manager. Please do the same on the both of the devices.
Right-click on the Ethernet Controller and select Properties.
2.
Select Driver tab and click on Update Driver.
3.
Follow the instructions. Select Search for a suitable driver for my device
4.
(Recommended) and click on Next.
Check on the Specify a location and click on Next to specify the path for
5.
the driver. Please refer to the Directory on EasyBUILD 7.1 build 100 for
NIC driver in Driver required section.
Follow the instructions to finish the installation.
6.
VGA Driver Installation
Note. The Microsoft DirectX 8 or later is required for the R910 onboard ATI
Radeon 7000 VGA driver. You can find and download the DirectX form the
Microsoft website http://www.microsoft.com/windows/directx/default.mspx.
Download the DirectX 8 or later from the Microsoft website.
1.
Follow the instructions to install the Microsoft DirectX 8 or later and
2.
reboot the server after the DirectX is installed.
27
Altos R910 Installation Configuration Guide
Advertisement
Table of Contents
