Table of Contents
Advertisement
Altos R910 Installation Configuration Guide
integrated SAS hardware RAID.
Select "Intel SAS RAID Controller Driver (Server 2003 32-bit)" as target
3.
driver.
After loading the RAID driver from diskette, follow the normal procedure
4.
to finish the installation.
SAS Backplane Driver Installation
There is a ESG-SHV, SCA HSBP M5.... SCSI Enclosure Device listed under
1.
Other device in Windows Device Manager. It is the hot-swap SAS
backplane for R910.
Right-click on the ESG-SHV, SCA HSBP M5.... SCSI Enclosure Device and
2.
select Update Driver.
Select No, not this time. Do not connect to Windows Update to search the
3.
driver.
Select Install from a list or specific location (Advanced).
4.
Select Search the best driver these locations and check Include this
5.
location in the search.
Click on Browse and specify the path for the driver. Please refer to the
6.
Driver required section for the Directory on EasyBUILD 7.1 build 300 for
Hot-swap backplane driver.
Click on Next and follow the instruction to finish the driver update.
7.
After installing the driver, you would see Intel (r) SCA Hotswap Backplane
8.
listed in System devices.
22
Advertisement
Table of Contents
