Setting Of Needle Bars - Brother BES-1241BC Instruction Manual

Chapter 5 Setting

Setting of Needle Bars

Needle bars allocated in the sequence of sewing can be modified.
1.
2.
3.
Insertion of Feedhold
Press
press
4.
92
This setting is explained on the basis of the BES-1241BC screen.
Press .
Select a sewing sequence to modify by pressing
The current embroidering sequence is selected while embroidering is interrupted.
Press for modifying all sequences at one time.
Input the number of a needle bar by pressing ten keys.
When inputting a numerical figure exceeding 10, press the
and reverse the display on the right of a point to insert a feedhold, then
.
STOP
Press .
END
Modified setting is saved and the previous screen is displayed again.
BES-941BC • BES-1241BC
.
0
first.
SPACE
A feedhold mark is displayed.