Retrieve the Embroidery Data
The description in this section is based on the method of reading data which is
registered in the memory unit of the machine.
Refer to "Selection of Data" (
1.
Press
switch.
Data saved in the machine is displayed.
2.
Select a screen by pressing
pressing ten keys or
When using ten keys for data selection, input a numerical figure (1 ~ 9) which indicates each
data name. Required embroidery data is selected and read.
3.
Press
key.
Required embroidery data is selected and read.
Selected embroidery data is read.
Start Embroidering
1.
Press
to check the embroidering area.
2.
Press
to start embroidering.
Sewing is started and the next screen is displayed.
BES-963BC • BES-1263BC
Chapter 2 Embroidering Procedures
Page 59) for details.
keys, and select required data by
.
55