Run the Software
1.
Select [Program] - [Brother Embroidery System] – [Ecsc] from the Start menu.
The software starts up.
Turn on the Machine Power
Main power switch
W1262Q
1.
Turn on the main power switch.
2.
Reset the emergency stop switch.
3.
Change the Flat / Cap hoop select switch according to the hoop to be used.
4.
Press the power switch.
5.
The computer screen changes when the machine is turn on.
Emergency stop switch
W1265Q
W1369Q
BE-1204B-BC • BE-1206B-BC
Flat / Cap hoop select swich
W1405Q
Chapter 3 Embroidering Procedures
Power switch
W1266Q
3-7