Hoop Automatic Retract; Movement To Registered Sewing Start Point - Brother BES-1216AC Instruction Manual

Hoop Automatic Retract

Set whether to move the hoop automatically to the retract point at the end of sewing.
This function is previously set to no hoop automatic retract upon shipments.
1. Press .
2. Select whether to retract the hoop automatically by pressing
For automatically retracting the hoop
For not retracting the hoop automatically
3. Press .
END
Modified setting is saved and the initial screen or halt screen is displayed again.

Movement to Registered Sewing Start Point

This operation should be done before starting sewing.
1. Hold down
S T O P
2. The hoop moves and the zero point is detected. Then the hoop moves to
a registered start point.
3. The initial screen is displayed again.
BES-916AC • BES-1216AC
and press .
Chapter 5 Setting
.
93