Table of Contents
Advertisement
FIRMWARE DOWNLOAD
5.3 FIRMWARE DOWNLOAD
The "Printer Setting Utility" can be used by connecting the machine to a PC
through a parallel or USB cable, or via Web Image Monitor through a network, to
upgrade the machine firmware.
5.3.1 DOWNLOAD PROCEDURE
NOTE: Do not turn off the machine power while updating the firmware.
Printer Setting Utility Mode
This procedure is used when the machine is connected via a parallel port or USB
port to a PC. The machine uses the Printer Setting Utility software to upgrade the
firmware.
1. Print out the System Data list, as a precaution, to back up system data and
settings.
2. Connect the PC and printer with parallel cable or USB cable.
3. Perform the Printer Setting Utility and set the Firmware Update tab. Current
firmware version and emulation version are shown.
4. Save the firmware file on the PC, in a path near the root of C:(ie, C:\TEMP).
Use the "Browse" button to obtain the firmware file, to update the machine.
5. Click the "Update" button. The firmware file automatically downloads to the
printer. The printer is initialized when the update has completed. Ensure that
the following appear on the LCD display when downloading the new firmware:
1) DATA RECEIVING (USB) / COPY/B FILE LPT1 (PARALELL)
2) PC TO DRAM IS OK
3) FLASH IS ERASING
4) FLASH PROGRAMMING
5) CHECKSUMMING
6) DOWNLOAD OK
7) Warming up Please wait...
6. Click the "Refresh" icon. Ensure that the version number shown matches the
new firmware.
Note: The country code will not change after downloading the new firmware.
B273
5-8
SM
Advertisement
Table of Contents
