[H]
8. Release the 3 x clips [H] on the front of the OPE unit [I]. Then remove the OPE
as shown.
NOTE: Ensure that the harness is threaded through the frame.
9. Remove 4 x securing the upper part [J] of the scanning unit.
10. Unclip 2 x clip securing the upper part of the scanning unit from the scanner
assembly. Lift the upper part of the scanning unit upward and remove it.
SM
[I]
B273R916.WMF
3-9
SCANNER ASSEMBLY
[J]
B273R917.WMF
B273