3.4 ADF MOTOR ASSEMBLY
Remove the following before removing the ADF motor assembly:
Rear cover 3.2.1
Side covers .3.2.2
Scanner assembly 3.3
[B]
1. Unclip the harness [A] from the platen cover.
2. Remove the 2 x securing the ADF assembly and remove it. (Ensure that the
harness is threaded through the frames).
[C]
3. Remove the cover [C] as shown
NOTE: Ensure that the rubber rollers do not become contaminated with grease
while disassembling the ADF motor assembly.
SM
ADF MOTOR ASSEMBLY
B273R925.WMF
B273R926.WMF
3-15
[A]
B273