Paper Jam Conditions - Ricoh AC205 Service Manual

4.2 PAPER JAM CONDITIONS

The following are conditions in which paper can become jammed during a print job:
• The tray is loaded incorrectly or overfilled.
• The tray has been pulled out during a print job.
• The front cover has been opened during a print job.
• Incorrect paper type was used.
NOTE: An error message shows on the LCD if a paper jam occurs. Find and
remove the jammed paper. If you don't see the paper, open the covers. Do
not use a tweezers, pincers or other metal tools to clear paper jams.
This could damage the internal mechanisms.
Jam0 (Paper Feed Area)
Jam2 (Paper Exit Area)
EXIT
Sensor
L
SM
L T P
M P S e n s o r
F e e d
S e n s o r
B273T07.WMF
T P
M P S e n s o r
F e e d
S e n s o r
B273T09.WMF
4-5
PAPER JAM CONDITIONS
Jam1 (Fusing/Toner Cartridge)
EXIT
Sensor
L T
By-pass Jam (By-pass Tray)
EXIT
Sensor
L T P
P
M P S e n s o r
F e e d
S e n s o r
B273T08.WMF
M P S e n s o r
F e e d
S e n s o r
FR
B273T10.WMF
B273