Middle Cover And Exit Roller - Ricoh AC205 Service Manual

MIDDLE COVER AND EXIT ROLLER

3.6 MIDDLE COVER AND EXIT ROLLER
Remove the following before removing the middle cover and exit roller:
Rear cover 3.2.1
Side covers 3.2.2
Scanner assembly 3.3
1. Remove 4 x  securing the middle cover [A]. Remove the middle cover.
[A]
2. Remove 2 x  securing the controller shield assembly [B] to the middle cover.
3. Unhook the middle cover [A] from the frame assembly, as shown above.
4. Use caution when removing the shield assembly locating pegs. Lift the top
cover out.
B273
[A]
3-20
B273R933.WMF
[B]
B273R934.WMF
SM