Ricoh AC205 Service Manual page 120

Service manual
Hide thumbs Also See for AC205:
Table of Contents

Advertisement

ERROR MESSAGES
Error
Memory full
No answer
Number not assigned
Number not available
No paper/Add paper
Operation not assigned
[Paper jam0] Open/Close
door
[Paper jam2] check inside
Power failure
Registered
Retry redial
Toner low
B273
Description
The memory is full.
The remote fax machine does
not answer after several
attempts.
The speed dial location has no
number assigned to it.
An attempt has been made to
delay the number for a delayed
fax job.
There is no paper in the paper
tray unit.
An Add/Cancel operation is
being performed, but there are
no jobs waiting.
Paper is jammed in the feed area
of the paper tray.
Paper is jammed in the paper
exit area.
The power has been turned off
then on, and the machine's
memory was not saved.
The group dial location is already
registered with another speed
dial number.
The machine is waiting for a
specified time interval to pass
before it attempts to dial a
previously busy number again.
The toner is almost empty.
4-34
Solution
Delete unnecessary
documents (delayed
transmission, broadcast,
polling etc.), or transmit the
documents again when
more memory becomes
available.
This can also occur when
sending a large, multiple
paged, complex document.
In this condition, split the
document into more than
one job.
Try again. Ensure the
receiving number is correct.
Dial the number manually
with the number keypad, or
assign the number.
Check the number to be
deleted and try again.
Delete the number after the
delayed fax job has
finished.
Load paper to the paper
tray unit.
Check the operation panel
to see if there are any jobs
waiting. The display shows
scheduled jobs in stand-by
mode, such as delayed fax.
Clear the jam.
Clear the jam.
In this condition, the
memory has been lost. The
job must be restarted.
Select another group dial
location.
Press <Select> to
immediately dial again, or
press <Cancel> to cancel
the redial operation.
Remove the toner cartridge
and gently shake it. This will
improve image quality
temporarily.
Replace the toner cartridge
to ensure print quality.
SM

Advertisement

Table of Contents
loading

This manual is also suitable for:

B273

Table of Contents