Table of Contents
Advertisement
PRINTING QUALITY PROBLEMS
4.5.9 GHOST 1
Description: Image "Ghosting" appears on the output prints at
75.5 mm intervals.
Cause
1.
Bad contacts caused by toner particles
between the high voltage terminal in the
main body, and the electrode of the toner
cartridge.
2.
Bad contacts caused by toner particles
between the high-voltage terminal in the
main body, and the in the HVPS board.
3.
The toner cartridge has reached end of
life.
4.
Transfer roller has reached end of life.
5.
Ambient temperature is below 10 C.
6.
Damaged cleaning blade in the toner
cartridge.
4.5.10 GHOST 2
Description: Image "Ghosting" appears on the output prints at 75
mm intervals.
Cause
Higher voltage required when printing on card
stock, thick paper, or OHP sheets.
B273
1.
Clean all HV contacts. Replace the HVPS
if the problem persists.
2.
Clean all HV contacts. Replace the HVPS
if the problem persists.
3.
Replace the toner cartridge.
4.
Replace the transfer roller.
5.
Turn the machine off. Wait 30 minutes
and turn the machine on again. Attempt to
print.
6.
Replace the toner cartridge.
Set the machine to print for these media
types, via the printer driver or application
software.
4-24
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
B273T922.WMF
Solution
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
B273T923.WMF
Solution
SM
Advertisement
Table of Contents
