Table of Contents
Advertisement
Error
Priority fax function full
Incompatible
Jam1 or No cartridge
Line busy
Load document
Scanner locked
Stop pressed
Toner empty replace toner
Retry redial
SM
Description
The priority fax job queue is full.
The remote machine does not
have the requested feature, such
as sending a color fax.
This message can also show if
the remote machine does not
have enough memory to
complete the job.
Paper is jammed in the paper
exit area, or the toner cartridge is
not installed.
The receiving machine does not
answer, or the line is busy.
An attempt has been made to set
up a copy/fax job, but no
document is loaded in the ADF.
The scanner module is locked.
The Stop/Copy button was
pressed during a copy/fax job.
The toner cartridge has run out
and the machine stops printing.
The machine is waiting for a
specified timer interval to dial a
previously busy station again.
4-35
ERROR MESSAGES
Solution
Cancel unnecessary priority
fax jobs.
Reconfirm the features of
the remote machine.
Clear the jam.
Install the toner cartridge.
Try again later.
Load the document in the
ADF and try again.
Unlock the scanner and
press Stop/Clear.
Try again.
Replace the toner cartridge.
Press <Enter> to
immediately redial, or press
Stop/Clear to cancel the
redial operation.
B273
Advertisement
Table of Contents
