Download  Print this page

Restoring Factory Default Settings - Dell 968w - All-in-One Wireless Printer Color Inkjet User Manual

User guide.
Hide thumbs

Advertisement

Table of Contents
5. Make sure the paper support and paper exit tray are dry before beginning a new print job.

Restoring Factory Default Settings

Menu settings marked with an asterisk (*) indicate the active settings. You can restore the original
printer settings, often referred to as the factory default settings .
1. Make sure the printer is on.
2. Press the down Arrow button
3. Press the down Arrow button
4. With Yes highlighted, press the Select button
NOTE: If a network adapter is attached to the printer, Also reset all Network Settings to
factory defaults? appears. Press the left or right Arrow button
then press the Select button
NOTE: Some settings such as phone lists, time, date, and country are not changed.
Restoring Language to Factory Default
You can restore the language on your display to factory default without using the printer menus.
NOTE: Using this key sequence will also restore all other selected settings to factory default.
1. Turn your printer off.
2. Press and hold the Start button
3. While holding the Start button
.
4. Continue holding the two buttons until the Initial Setup screen appears.
5. Press the left or right Arrow button
button
to save each selection.
6. Use the keypad to enter the time, date, your fax number, and your fax name. Press the Select
button
to save each selection.
The printer aligns the ink cartridges after your final selection.
to scroll to Maintenance, and then press the Select button
to scroll to Reset Defaults, and then press the Select button
.
.
and the Cancel button
and the Cancel button
to select your language and country. Press the Select
to select Yes or No, and
.
, press and release the Power button
.
.

Advertisement

Table of Contents

   Related Manuals for Dell 968w - All-in-One Wireless Printer Color Inkjet

This manual is also suitable for:

968968 all in one photo printer

Comments to this Manuals

Symbols: 0
Latest comments: