From the Network Time Menu, press the left or right Arrow button
disable the Time Server, and then press the Back button
NOTE: When Time Server is enabled, the wireless Ethernet card updates the
printer's time once a day or every time the printer is powered on.
Active Network Specify which network connection the adapter should use.
* Factory default setting
Wireless Menu
You can view or change the settings in the Wireless Setup Menu by selecting Wireless Menu from the
Network Setup menu.
Menu item
Network Name
Wireless Signal Quality
* Factory default setting
TCP/IP Menu
You can view or change the settings in the TCP/IP Menu by selecting TCP/IP from the Network
Setup menu.
Menu
Settings
item
Enable
Specify whether or not your network automatically assigns IP settings.
DHCP
Yes*
No
NOTE: You cannot change or set an IP Address, IP Netmask, and IP Gateway if DHCP is
enabled.
Set IP
Press the Select button
Address
From the Set IP Address menu, use the keypad to enter an IP address. Press the right
Arrow button
to erase an entry. Press the Back button
NOTE: The IP address cannot be changed if DHCP is enabled.
Set IP
Press the Select button
Netmask
Auto*
Ethernet 10/100
Wireless 802.11b/g
Settings
Reflects the current SSID being used.
NOTE: You cannot change the value of Network Name.
Press the Select button
to enter the Set IP Address menu.
to enter a set of numbers in the next field, or press the left Arrow button
to enter the Set IP Netmask menu.
to view the current signal quality.
to save the settings.
to enable or
to save the settings.
Need help?
Do you have a question about the 968w - All-in-One Wireless Printer Color Inkjet and is the answer not in the manual?