To print from an external Bluetooth-enabled device, you must attach a USB Bluetooth adapter to the
PictBridge port. The Bluetooth icon
To view or change Bluetooth Default Settings:
1. Press the up or down Arrow button
2. Press the up or down Arrow button
press the Select button
NOTE: When Bluetooth Enabled is set to On, the printer accepts Bluetooth
connections and allows the USB Bluetooth adapter to communicate with other Bluetooth-
NOTE: Set the Discovery Mode to On if you want other Bluetooth-enabled devices to
detect the USB Bluetooth adapter attached to your printer.
Specify your preferred security level.
Pass Key Specify a pass key. Any external Bluetooth-enabled device needs to enter this pass key
before it sends a print job.
NOTE: You only need to specify a pass key if the Security Level is set to High.
Press the Select button
NOTE: Your printer stores a maximum of eight external Bluetooth-enabled devices (trusted
devices). When the printer detects more than eight devices, the least recently used device is
removed from the list.
The name assigned to the USB Bluetooth adapter. When printing from an external
Bluetooth-enabled device, the Device Name or Device Address should be selected.
The address of your USB Bluetooth adapter. When printing from an external Bluetooth-
appears on the display once the USB Bluetooth adapter is active.
to scroll to Setup, and then press the Select button
to scroll to Change Bluetooth Default Settings, and then
Bluetooth Default Settings Menu
to clear the list of trusted devices.
Trusted Devices–Clear All