Restoring Factory Default Settings - Dell 948 User Manual

Maintenance

Restoring Factory Default Settings

Menu settings marked with an asterisk (*) indicate the active settings. You can restore the original printer settings, often
referred to as the factory default settings.
1. Make sure the printer is on.
2. From the operator panel, use the left and right Arrow buttons
button .
3. Use the left and right Arrow buttons
4. Use the left and right Arrow buttons
5. Use the left and right Arrow buttons
Settings are reset to factory defaults.
Restoring Language to Factory Default
You can restore the language on your display to factory default without using the printer menus.
NOTE: Using this key sequence will also restore all other selected settings to factory default.
1. Turn your printer off.
2. Press and hold the Back button
3. Continue pressing these buttons until Lang cleared appears on the display.
4. Use the left and right Arrow buttons
Press the Select button
file:///T|/htdocs/systems/prn948/en/en/d0e10317.html[10/10/2012 11:05:35 AM]
to scroll to Defaults, and then press the Select button
to scroll to Set Defaults, and then press the Select button
to scroll to Use Factory, and then press the Select button
and the Start button
to select your language, country, time, date, fax number, and fax name.
to save each selection.
to scroll to SETUP, and then press the Select
while pressing the Power button
.
.
.
.