Platform Monitor Removal - HP L1000 - 9000 - 0 MB RAM User Manual

Removing and Replacing Components
Individual Component Remove/Replace Instructions

Platform Monitor Removal

The Platform Monitor resides on the System Board and is accessed via the Top Service Bay.
Removing rp5400 and/or rp5450 Model Platform Monitors
Looking into the Top Service Bay from the front, the rp5400/rp5450 model Platform Monitor is located on the
left side at the front of the server.
To remove the rp5400/rp5450 model Platform Monitor, perform the following steps:
1. Pull up on the extractor levers on each end of the Platform Monitor to unseat it from its socket.
2. When the Platform Monitor unseats from the socket, pull it up and away from the System Board.
The following graphics show a Platform Monitor board followed by a display of Platform Monitor
removal/replacement.
Removing The rp5470 Model Platform Monitor
Looking into the Top Service Bay from the front, the rp5470 model Platform Monitor is located on the right
side at the front of the server.
To remove an rp5470 model Platform Monitor, perform the following steps:
1. Pull up on the extractor levers on each end of the Platform Monitor to unseat it from its socket.
2. When the Platform Monitor unseats from the socket, pull it up and away from the System Board.
168
Chapter 7