HotSwap Chassis Fan Cover Replacement
The power to the server does not have to be off to remove or replace a HotSwap Chassis Fan cover. Fan
number 0 is located in the front of the server and fan number 1 is located at the rear of the server.
To replace a chassis fan cover, perform the following tasks:
1. Insert the cover into position in front of the fan.
2. Tighten the captive T-15 screws on each side of the cover.
The following graphic shows a HotSwap Chassis Fan Cover.
Chapter 7
Removing and Replacing Components
Individual Component Remove/Replace Instructions
153