Factory Integrated Rp54Xx Cabinet Installation - HP L1000 - 9000 - 0 MB RAM User Manual

Server Unpacking and Installation

Factory Integrated rp54xx Cabinet Installation

Factory Integrated rp54xx Cabinet Installation
A factory integrated server is one in which the rp54xx server and associated components are pre-assembled
and shipped from the factory already installed in a Hewlett-Packard E-Series cabinet. Factory integrated
systems reduce the amount of time required to set-up and begin server operation.
1. Carefully remove the carton and anti-static bag from the pallet.
2. Remove the front two (2) L-brackets. Retain the 1/2-inch bolts for later use.
As viewed from the front, one bracket is located on each side at the base of the cabinet near
NOTE
the front.
4
1
Rear
Front
1
2
1. Shipping L-Bracket
3
2. Shipping Pallet
3. Cabinet (Top View)
Chapter 2