Step 8. Use the arp command to add an ARP entry for the IP address using the GSP MAC address.
•
For HP-UX systems, the format of the MAC address is 00:30:6e:05:0a:ea
•
For MS DOS systems, the format of the MAC address is 00-30-6e-05-0a-ea
Step 9. Use the ping command to assign the I.P address for the GSP.
Step 10. The revision B GSP is now accessible via LAN. Access the GSP and configure remaining network
parameters using the LAN Configuration (lc) command:
GSP> lc
The lc command will start a series of prompts. Respond to each prompt with the appropriate information.
Example 4-3
LAN Configuration from a PC
Configure the Web Console
For the revision A GSP, the web console is accomplished via the J3591A Secure Web Console. Below is an
illustration of the web console for the revision A GSP.
Chapter 4
Cable Connections
Configure System Consoles
61