Interpreting System Alerts - HP L1000 - 9000 - 0 MB RAM User Manual

Troubleshooting
Chassis Code to FRU Decode
Step 2. The Source Detail, the Source ID, and the Problem Detail values are all not applicable for the
Processor row of the table.
Step 3. The FRU column of the table identifies the FRU as a failing processor.
Step 4. The Action column of the table instructs us to use the Info Menu and PR command of the BCH
Main Menu to identify the failing processor.
Here is the output of Step 4 in our example:
Main Menu: Enter command or menu > in
---- Information Menu ----------------------------------------------
Command
-------
ALL
BootINfo
CAche
ChipRevisions
COprocessor
FRU
FwrVersion
IO
LanAddress
MEmory
PRocessor
WArnings
----
Information Menu: Enter command > pr
PROCESSOR INFORMATION
Processor
---------
1
3
Central Bus Speed (in MHz)
Software ID (dec)
Software ID (hex)
Software Capability
Information Menu: Enter command >
Processor #3 is Stopped:Nonresponding. Replace Processor #3.

Interpreting System Alerts

System Alerts are reported to the system console when a problem is detected by the Service Processor. These
alerts are stored in the Service Processor Error Logs. When this new alert is added to the log file, it will cause
the front panel ATTENTION LED to blink.
94
Description
-----------
Display all system information
Display boot-related information
Display cache information
Display revisions of major VLSI
Display coprocessor information
Display FRU information
Display firmware version
Display I/O interface information
Display Core LAN station address
Display memory information
Display processor information
Display selftest warning messages
HVERSION SVERSION
Speed Model Model/Op
-------- -------- --------
440 MHz 0x05c4 0x0491
440 MHz 0x05c4 0x0491
:
: 1635329341
: 0x6179253d
: 0x01100000f0
Processor
CVERSION State
-------- -------------
2. 0 Active
2. 0 Stopped:Nonresponding
82
Chapter 6