Removing and Replacing Components
Individual Component Remove/Replace Instructions
Side Cover Replacement
The power to the server does not have to be off to replace the side cover. However, operation of the server
without the side cover in place can make it susceptible to EMI problems.
Replace the side cover according to the following steps:
1. Grasp the strap handle and insert the tabbed end of the cover into the server chassis slots on the right
side of the side service bay.
2. Push the cover into the side service bay opening and fasten the captive T-15 screws that hold the side
cover in place.
The following graphic shows the side cover with captive screw locations.
134
Chapter 7