The Stacking Information window holds the following information:
Parameter
Box ID
User Set
Type
Exist
Priority
Prom Version
Runtime Version
H/W Version
Topology
My Box ID
Current State
Box Count
Device Status
The Device Status window can be found in the Monitoring menu by clicking the Device Status link.This window shows the status of the physical
attributes of the Switch, including power sources and fans.
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch
Figure 9- 15. Stacking Information window
Description
Displays the Switch's order in the stack.
Box ID can be assigned automatically (Auto), or can be assigned statically. Default is Auto.
Displays the model name of the corresponding switch in a stack.
Denotes whether a switch does or does not exist in a stack.
Displays the priority ID of the Switch.The lower the number, the higher the priority.The box (switch) with the
lowest priority number in the stack denotes the Master switch.The AT-9724TS will always be the master switch
in a Star topology.
Shows the PROM in use for the Switch.This may be different from the values shown in the illustration.
Shows the firmware version in use for the Switch.This may be different from the values shown in the
illustrations.
Shows the hardware version in use for the Switch.This may be different from the values shown in the
illustration.
Show the current topology employed using this Switch.
Displays the Box ID of the Switch currently in use.
Displays the current stacking state of the Switch, which may be MASTER or SLAVE.
Displays the number of switches in the switch stack.
167