Layer 3 Feature; Browse Ip Address - Allied Telesis AT-9724TS Installation And User Manual

Note: To configure 802.1x features for the AT-9724TS, go to the Configuration folder and select Port Access Entity. Configuration
and other information concerning 802.1x may be found in Section 6 of this manual under Port Access Entity.

9-12 Layer 3 Feature

This folder in the Monitoring section will display information concerning settings configured in Layer 3 IP Networking of the Configuration folder.
These settings and parameters have been previously described in Chapter 6 of this manual, under Layer 3 IP Networking.

Browse IP Address

The Browse IP Address window may be found in the Monitoring menu in the Layer 3 Feature folder.The Browse IP Address window is a read
only screen where the user may view IP addresses discovered by the Switch.To search a specific IP address, enter it into the field labelled IP Address at the top
of the screen and click Find to begin your search.
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch
Figure 9- 29. Browse IP Address Table
178