Transmitted (Tx) - Allied Telesis AT-9724TS Installation And User Manual

The following fields may be set or viewed:
Parameter
Time Interval
Record Number
Unicast
Multicast
Broadcast
Show/Hide
Clear
View Table
View Line

Transmitted (TX)

Click the Transmitted (TX) link in the Packets folder of the Monitoring menu to view the following graph of packets transmitted from the Switch.To
select a port to view these statistics for, first select the Switch in the switch stack by using the Unit pull-down menu and then select the port by using the Port
pull down menu.The user may also use the real-time graphic of the Switch and/or switch stack at the top of the web page by simply clicking on a port.
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch
Figure 9- 6. Rx Packets Analysis window (table for Unicast, Multicast, and Broadcast Packets)
Description
Select the desired setting between 1s and 60s, where "s" stands for seconds.The default value is one second.
Select number of times the Switch will be polled between 20 and 200.The default value is 200.
Counts the total number of good packets that were received by a unicast address.
Counts the total number of good packets that were received by a multicast address.
Counts the total number of good packets that were received by a broadcast address.
Check whether or not to display Multicast, Broadcast, and Unicast Packets.
Clicking this button clears all statistics counters on this window.
Clicking this button instructs the Switch to display a table rather than a line graph.
Chart Clicking this button instructs the Switch to display a line graph rather than a table.
160