Snmp Engine Id - Allied Telesis AT-9724TS Installation And User Manual

The following parameters can be set:
Parameter
Host IP Address
SNMP Version
Community String or
SNMP V3 User Name
To implement your new settings, click Apply.To return to the SNMP Host Table, click the Show All SNMP Host Table Entries link.

SNMP Engine ID

The Engine ID is a unique identifier used for SNMP V3 implementations.This is an alphanumeric string used to identify the SNMP engine on the Switch.
To display the Switch's SNMP Engine ID, open the SNMP Manager folder and click on the SNMP Engine ID link.This will open the SNMP Engine ID
Configuration window, as shown below.
To change the Engine ID, type the new Engine ID in the space provided and click the Apply button.
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch
Figure 8-10. SNMP Host Table Configuration window
Description
Type the IP address of the remote management station that will serve as the SNMP host for the Switch.
V1 – To specifies that SNMP version 1 will be used.
V2 – To specify that SNMP version 2 will be used.
V3-NoAuth-NoPriv – To specify that the SNMP version 3 will be used, with a NoAuth-NoPriv security level.
V3-Auth-NoPriv – To specify that the SNMP version 3 will be used, with an Auth-NoPriv security level.
V3-Auth-Priv – To specify that the SNMP version 3 will be used, with an Auth-Priv security level.
Type in the community string or SNMP V3 user name as appropriate.
Figure 8-11. SNMP Engine ID Configuration window
155