Stacking Information - Allied Telesis AT-9724TS Installation And User Manual

The following fields can be set or viewed:
Parameter
Time Interval
Record Number
64
65-127
128-255
256-511
512-1023
1024-1518
Show/Hide
Clear
View Table
View Line Chart

Stacking Information

To change a switch's default stacking configuration (for example, the order in the stack), see Box Information in the Configuration folder.
The number of switches in the switch stack (up to 12 total) are displayed in the upper right-hand corner of your web-browser.The icons are in the same order
as their respective Unit numbers, with the Unit 1 switch corresponding to the icon in the upper left-most corner of the icon group.
When the switches are properly interconnected through their optional Stacking Modules, information about the resulting switch stack is displayed under the
Stack Information link.
To view the stacking information, click on the Stacking Information link from the Monitoring folder:
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch
Figure 9- 14. Rx Size Analysis window (table)
Description
Select the desired setting between 1s and 60s, where "s" stands for seconds.The default value is one second.
Select number of times the Switch will be polled between 20 and 200.The default value is 200.
The total number of packets (including bad packets) received that were 64 octets in length (excluding framing
bits but including FCS octets).
The total number of packets (including bad packets) received that were between 65 and 127 octets in length
inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between 128 and 255 octets in length
inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between 256 and 511 octets in length
inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between 512 and 1023 octets in length
inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between 1024 and 1518 octets in
length inclusive (excluding framing bits but including FCS octets).
Check whether or not to display 64, 65-127, 128-255, 256-511, 512-1023, and 1024 1518 packets received
1024-1518 packets received.
Clicking this button clears all statistics counters on this window.
Clicking this button instructs the Switch to display a table rather than a line graph.
Clicking this button instructs the Switch to display a line graph rather than a table.
166