Time Zone And Dst - Allied Telesis AT-9724TS Installation And User Manual

Time Zone and DST

The following are screens used to configure time zones and Daylight Savings time settings for SNTP. Open the Configuration folder, then the SNTP folder
and click on the Time Zone and DST link, revealing the following screen.
The following parameters can be set:
Parameter
Daylight Saving Time State
Daylight Saving Time Offset
in Minutes
Time Zone Offset from GMT in Use these pull-down menus to specify your local time zone's offset from Greenwich Mean Time (GMT.)
+/- HH:MM
DST Repeating Settings
From: Which Day
From: Day of Week
From: Month
From: Time in HH:MM
To: Which Day
To: Day of Week
To: Month
To: time in HH:MM
DST Annual Settings
From: Month
From: Day
From: Time in HH:MM
To: Month
To: Day
To: Time in HH:MM
Click Apply to implement changes made to the Time Zone and DST window.
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch
Figure 6- 59.Time Zone and DST Settings Page
Description
Use this pull-down menu to Enable or Disable the DST Settings.
Use this pull-down menu to specify the amount of time that will constitute your local DST offset - 30, 60, 90, or
120 minutes.
Using repeating mode will enable DST seasonal time adjustment. Repeating mode requires that the DST
beginning and ending date be specified using a formula. For example, specify to begin DST on Saturday during
the second week of April and end DST on Sunday during the last week of October.
Enter the week of the month that DST will start.
Enter the day of the week that DST will start on.
Enter the month DST will start on.
Enter the time of day that DST will start on.
Enter the week of the month the DST will end.
Enter the day of the week that DST will end.
Enter the month that DST will end.
Enter the time DST will end.
Using annual mode will enable DST seasonal time adjustment.Annual mode requires that the DST beginning and
ending date be specified concisely. For example, specify to begin DST on April 3 and end DST on October 14.
Enter the month DST will start on, each year.
Enter the day of the month DST will start on, each year.
Enter the time of day DST will start on, each year.
Enter the month DST will end on, each year.
Enter the day of the month DST will end on, each year.
Enter the time of day that DST will end on, each year.
75