Size - Allied Telesis AT-9724TS Installation And User Manual

Parameter
Time Interval
Record Number
ExDefer
LateColl
ExColl
SingColl
Coll
Show/Hide
Clear
View Table
View Line

9-5 Size

The Web Manager allows packets received by the Switch, arranged in six groups and classed by size, to be viewed as either a line graph or a table.Two windows
are offered.To select a port to view these statistics for, first select the Switch in the switch stack by using the Unit pull-down menu and then select the port by
using the Port pull down menu.The user may also use the real-time graphic of the Switch and/or switch stack at the top of the web page by simply clicking on a
port.
To view the Packet Size Analysis Table, click the link View Table, which will show the following table:
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch
Description
Select the desired setting between 1s and 60s, where "s" stands for seconds.The default value is one second.
Select number of times the Switch will be polled between 20 and 200.The default value is 200.
Counts the number of packets for which the first transmission attempt on a particular interface was delayed
because the medium was busy.
Counts the number of times that a collision is detected later than 512 bit-times into the transmission of a
packet.
Excessive Collisions.The number of packets for which transmission failed due to excessive collisions.
Single Collision Frames.The number of successfully transmitted packets for which transmission is inhibited by
more than one collision.
An estimate of the total number of collisions on this network segment.
Check whether or not to display ExDefer, LateColl, ExColl, SingColl, and Coll errors.
Clicking this button clears all statistics counters on this window.
Clicking this button instructs the Switch to display a table rather than a line graph.
Chart Clicking this button instructs the Switch to display a line graph rather than a table.
Figure 9- 13. Rx Size Analysis window (line graph)
165