Configuring The Switch; Switch Information - Allied Telesis AT-9724TS Installation And User Manual

Chapter 6 - Configuring The Switch

6-1 Switch Information

6-2 IP Address
6-3 Box Information
6-4 Advanced Settings
6-5 Port Configuration
6-6 Port Description
6-7 Port Mirroring
6-8 Link Aggregation
6-9 LACP Port Setting
6-10MAC Notification
6-11GMP
6-12 Spanning Tree
6-13 Forward & Filtering
6-14 VLANs
6-15 Traffic Control
6-16 Port Security
6-17 Port Lock Entries
6-18 QoS
6-19 System Log Servers
6-20 SNTP Setting
6-21 Access Profile Table
6-22 Port Access Entity
6-23 Layer 3 IP Networking
6-1 Switch Information
The subsections below describe how to change some of the basic settings for the Switch such as changing IP settings and assigning user names and passwords for
management access privileges, as well as how to save the changes and restart the Switch.
Click the Switch Information link in the Configuration menu.
The Switch Information window shows the Switch's MAC Address (assigned by the factory and unchangeable), the Boot PROM, Firmware
Version, and Hardware Version.This information is helpful to keep track of PROM and firmware updates and to obtain the Switch's MAC address for entry
into another network device's address table, if necessary.The user may also enter a System Name, System Location and System Contact to aid in
defining the Switch, to the user's preference.
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch
Figure 6- 1. Switch Information – Basic Settings window
28