Sd Card Problems; Usb Drive Key Problems; Fan Problems - HP ProLiant BL620c - G7 Server Troubleshooting Manual

Proliant g4/5/6 servers
Hide thumbs Also See for ProLiant BL620c - G7 Server:
Table of Contents

Advertisement

SD card problems

System does not boot from the drive
Action:
Be sure the drive boot order in RBSU is set so that the server boots from the SD card.
1.
Reseat the SD card.
2.

USB drive key problems

System does not boot from the drive
Action:
Be sure that USB is enabled in RBSU.
1.
Be sure the drive boot order in RBSU is set so that the server boots from the USB drive key.
2.
Reseat the USB drive key.
3.

Fan problems

General fan problems are occurring
Action:
Be sure the fans are properly seated and working.
1.
Follow the procedures and warnings in the server documentation for removing the access panels
a.
and accessing and replacing fans.
Unseat, and then reseat, each fan according to the proper procedures.
b.
Replace the access panels, and then attempt to restart the server.
c.
Be sure the fan configuration meets the functional requirements of the server. Refer to the server
2.
documentation.
Be sure no ventilation problems exist. If you have been operating the server for an extended period
3.
of time with the access panel removed, airflow may have been impeded, causing thermal damage
to components. Refer to the server documentation for further requirements.
Be sure no POST error messages
4.
displayed while booting the server that indicate temperature violation or fan failure information.
Refer to the server documentation for the temperature requirements for the server.
Access the IML to see if any event list error messages (on page 157) relating to fans are listed.
5.
Replace any required non-functioning fans and restart the server. Refer to the server documentation
6.
for specifications on fan requirements.
Be sure all fan slots have fans or blanks installed. Refer to the server documentation for requirements.
7.
Verify the fan airflow path is not blocked by cables or other material.
8.
Hot-plug fan problems are occurring
Action:
("POST error messages and beep
codes" on page 115) are
Hardware problems 46

Advertisement

Table of Contents
loading

This manual is also suitable for:

ProliantProliant 100 series

Table of Contents