Table of Contents
Advertisement
Quick Links
QuickSpecs
Overview
1.
Two hot-plug small form factor (SFF) SAS/SATA/SSD bays
2.
Power on/standby button
3.
UID, health, and network adapter LEDs
4.
32 RDIMM slots supporting up to 1.0TB of DDR3-1333
memory (operating up to 1066 MHz)
5.
One USB 2.0 port, one MicroSD high capacity (SDHC) port, and
one TPM 1.2 connector
6.
Three PCIe Gen2 I/O expansion mezzanine slots
What's New
Support for the HP OneView Software integrated management platform and a HP 8GB USB Enterprise Mainstream Flash Media
Drive Key Kit
HP ProLiant BL620c Generation 7 (G7) Server Blade
DA - 13747 Worldwide — Version 35 — December 13, 2013
HP ProLiant BL620c Generation 7 (G7) Server Blade
7.
Four NC553i 10Gb FlexFabric adapter ports
8.
iLO 3 Management adapter port
9.
HP P410i Smart Array flash cache connector
10. One or two Intel® Xeon® E7-2800 family processors up to
eight-cores each (below the hard drives)
11. Server release lever
Page 1
Advertisement
Table of Contents
Related Manuals for HP ProLiant BL620c
Summary of Contents for HP ProLiant BL620c
- Page 1 Three PCIe Gen2 I/O expansion mezzanine slots What's New Support for the HP OneView Software integrated management platform and a HP 8GB USB Enterprise Mainstream Flash Media Drive Key Kit DA - 13747 Worldwide — Version 35 — December 13, 2013...
-
Page 2: Standard Features
HP ProLiant BL620c Generation 7 (G7) Server Blade Standard Features This document covers the HP ProLiant BL620c G7 server blade only. For more information on the HP BladeSystem c-Class Enclosure and HP BladeSystem c-Class Interconnects, please see the following: HP BladeSystem c3000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html... - Page 3 NOTE: Fibre Channel over Ethernet (FCoE) capability requires the use of an HP Virtual Connect FlexFabric 10Gb/24-port Module or HP 10GbE Pass-Thru Module. NOTE: The Flex-10 capability requires the use of an HP Virtual Connect Flex-10 10Gb Ethernet module or HP 10GbE Pass-Thru Module.
- Page 4 Mezzanine slot's 1 ports are routed to interconnect bays 3,4,3,4 (c7000) and 2,2,2,2 (c3000) NOTE: HP recommends 10Gb adapters be installed in a x8 PCIe slot for optimal performance. NOTE: Type II slots accept both Type I or Type II cards. Type I slots accepted Type I cards only.
- Page 5 Enclosures HP offers two different c-Class server blade enclosures to meet your individual needs: The HP BladeSystem c7000 rack enclosure is 10U high and holds up to 4 HP ProLiant BL680c G7 servers plugged vertically. The HP BladeSystem c3000 rack enclosure is 6U high and holds up to 2 HP ProLiant BL680c G7 servers plugged horizontally.
- Page 6 BladeSystem enclosure components (Onboard Administrator and Virtual Connect). This testing ensures the highest quality as well as providing the input for HP SUM to deploy updates taking into account all interdepencies, when determining the correct updates and order of update deployment.
- Page 7 Rank Sparring (On Line Spare) provides dynamic failover to a spare DIMM rank or spare rank pair behind the same memory controller. Cannot be enabled concurrently with memory mirroring. NOTE: HP offers the rank sparing rather than DIMM sparing as rank sparing uses less spare memory resulting in less overhead.
- Page 8 Optional multiple Smart Array RAID mezzanine controllers (with BBWC and FBWC) for direct attach and shared SAS storage external to the c-Class enclosure. Optional HP D2200sb Storage Blade for direct attached and shared storage within the c-Class enclosure. Intel® QuickPath Interconnect (QPI) QPI Link Retry restarts as cycle when a failure is detected on the link.
- Page 9 Optional enclosure redundant Onboard Administrator system management module. Warranty: This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase.
-
Page 10: Optional Features
Up to three (3) optional 4Gb and/or 8Gb Fibre Channel HBA mezzanine adapters (Brocade, Emulex and QLogic options). Compatible SAN HP ProLiant BL620c G7 server blades are optimized for HP MSA, EVA, and XPHP and are compatible with select third party SANs. See the blade storage page for more details at http://h18004.www1.hp.com/products/blades/components/c-class-sans.html. - Page 11 Architected to deliver lifecycle management for the complete Converged Infrastructure, it facilitates collaboration, removes friction, collapses cycle times, eliminates error-prone work, and accelerates time to value. HP OneView v1.0 combines management of servers and virtual connect with open integration to automate and customize existing tools and processes.
- Page 12 HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.
-
Page 13: Service And Support
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment. That's why it makes sense to team up with the people who know HP infrastructure hardware and software best - the experienced professionals at HP Services. - Page 14 Learn more http://www.hp.com/go/hpsc HP's Support Center Mobile App allows you to resolve issues yourself or quickly connect to an agent for live support. Now, you can get access to personalized IT support anywhere, anytime. HP Insight Remote Support and HP Support Center are available at no additional cost with a HP warranty, HP Care Pack or HP contractual support agreement.
-
Page 15: Pre-Configured Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. NOTE: Not all models are available in all regions. Check with your local country HP offices for availability. HP ProLiant BL620c G7 E7- Processor(s) (1) Intel®... -
Page 16: Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on Factory Integrated Model product offerings and requirements. - Page 17 HP BladeSystem c3000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html NOTE: The c3000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are supported in the new enclosures and any future server blades will be supported in the existing enclosures. HP BladeSystem c7000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html...
-
Page 18: Core Options
NOTE: A 10 Gigabit Ethernet adapter will down speed to 1Gb if paired with a 1GbE interconnect. NOTE: HP recommends 10Gb adapters be installed in an x8 PCIe slot for optimal performance. HP NC532m Dual Port 10GbE Multifunction BL-c Adapter... - Page 19 ROM must be flashed to the latest BIOS prior to the upgrade. NOTE: Intel® Xeon® E7-2800/8867L series processors cannot be used to upgrade a ProLiant BL620c G7 server blade with Intel® Xeon® 6500/7500 series processors. Ten-Core Processors HP BL620c G7 Intel® Xeon® E7-2870 (2.40GHz/10-core/30MB/130W) Processor Kit 643749-B21 HP BL620c G7 Intel®...
- Page 20 HP ProLiant BL620c Generation 7 (G7) Server Blade Core Options HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 718160-B21 HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 693648-B21 HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive...
- Page 21 730059-B21 Solid State Drive 6G SAS Hot Plug Enterprise Performance Solid State Drives HP 400GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty Solid State 632494-B21 Drive HP 200GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty Solid State...
-
Page 22: Additional Options
HP iLO Advanced Blade including 3yr 24x7 Tech Support and Updates Electronic License E6U63ABE HP iLO Advanced Blade 1 Server License with 3yr 24x7 Tech Support and Updates BD502A HP iLO Advanced for BladeSystem including 1yr 24x7 Support Eight Server License... - Page 23 HP OneView Media Kit Phys No Lic E5Y37A HP OneView without iLO Advanced HP OneView w/o iLO Adv incl 3yr 24x7 Supp Phys 1 Svr Lic E5Y38A HP OneView w/o iLO Adv inc 3yr 24x7 Supp Flex Qty E-LTU E5Y39AAE NOTE: For additional license kits please see the QuickSpecs at http://h18004.www1.hp.com/products/quickspecs/14621_div/14621_div.html...
- Page 24 488348-B21 Optional Upgrades HP 512MB Flash Backed Write Cache 534916-B21 NOTE: This is an option for the HP Smart Array P410i Controller (P410i is standard integrated controller). HP 1GB Flash Backed Cache 534562-B21 NOTE: This is an option for the HP Smart Array P410i Controller (P410i is standard integrated controller).
- Page 25 Ultrium Tape Blades and the PCI Expansion Blade. Up to two Ultrium Tape and/or PCI Expansion Blades are supported per server mix and match. NOTE: The HP PCI Express Mezzanine Pass-Thru Card can be placed in mezzanine slot 2 and/or 3.
- Page 26 NOTE: The HP PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21) is required to support the HP PCI Expansion Blade with the BL620c G7. Up to two expansion blades are supported per server mix and match (Ultrium Tape, PCI Expansion Blades, and/or Storage Expansion Blades).
- Page 27 HP 3 year 4 hour 24x7 ProLiant BL6xxc Proactive Care Service U3B32E HP 3 year 4 hour 24x7 with Defective Media Retention ProLiant BL6xxc Proactive Care U3B35E Service HP 3 year 6 hour Call To Repair 24x7 ProLiant BL6xxc Proactive Care Service...
- Page 28 RDIMMs with identical part numbers throughout the system. For best performance, HP recommends that RDIMM pairs be populated in sequence by letter designation. Install RDIMM pair (4A, 5A) first, followed by RDIMM pair (12B, 16B), RDIMM pair (2C, 7C), RDIMM pair (10D, 14D), RDIMM pair (3E, 6E), RDIMM pair (11F, 15F), and RDIMM pair (1G, 8G).
- Page 29 HP Memory Registered DIMMs (RDIMMs) Following are the BL620c G7 memory options available from HP: HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit 500658-B21 HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit...
- Page 30 QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Storage 2 x SFF SAS/SATA/SDD hot-plug hard drives Hard Drives NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
- Page 31 QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Storage Quantity Position Supported Supported Controller 800GB 6G SATA VE SFF HP Smart Array P410i Controller 600GB 6G SATA VE SFF 480GB 6G SATA VE SFF 300GB 6G SATA VE SFF 240GB 6G SATA VE SFF 6G SATA ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives...
-
Page 32: Technical Specifications
(Worldwide) HP BladeSystem c7000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12810_div/ 12810_div.html (Worldwide) To review typical system power ratings use the HP BladeSystem Power Sizer available at: http://www.hp.com/go/bladesystem/powercalculator. System Inlet Operating 10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F... - Page 33 Network Transfer Rate 20Gbps per port full duplex only (theoretical maximum value) NOTE: Each port is autosensing 1Gb / 10Gb, and can interoperate with 1Gb HP BladeSystem c-Class interconnect components. NOTE: Each port on the NC553i adapter transmits from the server at 20Gbps (theoretical) full duplex.
- Page 34 QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Technical Specifications iSCSI boot Flex-10 support TCP/IP offload engine 10Gb Ethernet ort 1Gb Ethernet autosensing Microsoft TCP chimney compliant Supports 8 Physical Functions (PF) Supports 128 Virtual Functions (VF): Up to 32 VFs per PF...
- Page 35 To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities.
- Page 36 Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.