Specifying Custom Status Policies - HP StorageWorks 2/8-EL - SAN Switch Installation Manual
San switch 2/8 v3.1.x - installation guide
Hide thumbs
Also See for StorageWorks 2/8-EL - SAN Switch:
- Release note (26 pages) ,
- Release note (16 pages)
Table of Contents
Advertisement
Installing the SAN Switch 2/8
Specifying Custom Status Policies
Optional. If desired, specify any custom status policies for the fabric as follows.
1. Enter the following at the prompt.
2. Specify the desired status policies. To completely deactivate the alarm for a
64
switchStatusPolicySet
particular condition, enter 0 at the prompt for that condition.
SAN Switch 2/8 Version 3.1.x Installation Guide
Advertisement
Table of Contents
