Unpack And Verify Carton Contents; Carton Contents - HP StorageWorks 2/8-EL - SAN Switch Installation Manual

Installing the SAN Switch 2/8

Unpack and Verify Carton Contents

Unpack and inspect the SAN Switch 2/8 carton contents as follows.
1. Inspect the shipping cartons for possible damage caused during transit.
2. Unpack the shipping cartons.
3. Verify that the carton contains the items shown in
Note:
with your switch. HP reserves the right to substitute Rack Mount Kits, providing
applicable instructions with each switch.
1
Figure 5: Carton contents
28
items are damaged or missing, please contact HP or an HP authorized reseller.
The Rack Mount Kit shown in
2
6
Figure 5
Figure 5 may not represent the kit that shipped
3
4
SAN Switch 2/8 Version 3.1.x Installation Guide
3. If any
and Table
5
SHR-2495B