Shipping Carton Contents - HP StorageWorks 2/8-EL - SAN Switch Installation Manual

Table 3: Shipping Carton Contents
Number
1
2
3
4
5
6
* Depending on time of purchase, the Fixed Rack Mount Kit items listed in
not represent the kit that shipped with your switch. For a complete list of possible HP
rack mount kits, see
SAN Switch 2/8 Version 3.1.x Installation Guide
Item
One HP StorageWorks SAN Switch 2/8
product accessory bag containing CD,
license, documentation and Release
Notes
HP StorageWorks Switch 2/8
One standard AC power cord, and one
PDU cord
One RS-232 Serial cable
*Fixed Rack Mount Kit containing:
• right front bracket
• left front bracket
• right rear bracket
• left rear bracket
Pouch containing Fixed Rack Mount Kit
hardware:
• 8-32 x 5/16-inch pan head Phillips
screws (6)
• 6-32 x 5/16-inch pan head Phillips
screws (8)
• 10-32 x 5/8-inch pan head Phillips
screws (8)
• retainer nuts (8)
• rubber mounting feet (4), use if
installing on a flat surface
Installation Guidelines
Description
on page 30.
Installing the SAN Switch 2/8
Table 3 may
29