Assembling The Outer Rails - HP StorageWorks 2/8-EL - SAN Switch Installation Manual

Installing the SAN Switch 2/8
Outer rail alignment pins
1
Figure 11: Assembling the outer rails
42
1
2
2
Caution: Do not use any other screws other than the eight that are provided.
Use of any longer lengths can cause damage to internal components of the
switch. Be sure to install the flat washers along with the pan-head screws.
Before tightening screws, make sure that the rails are centered to the overall
height of the switch.
SHR-2560A
M5 torx screws
SAN Switch 2/8 Version 3.1.x Installation Guide