Installing The Rear Mounting Brackets (Hp 9000 Series Or Comparable Eia Rack) - HP StorageWorks 2/8-EL - SAN Switch Installation Manual

Installing the SAN Switch 2/8
3. Attach the rear mounting brackets to the rear rack uprights by completing one
Figure 15: Installing the rear mounting brackets (HP 9000 Series or comparable EIA
rack)
48
of the following steps:
— For an HP 9000 Series or comparable EIA rack, assemble each of the two
brackets with (2) #10-32 x 1/2-inch Phillips pan-head screws with captive
star lock washers and (2) #10 adapter washers as shown in
SAN Switch 2/8 Version 3.1.x Installation Guide
Figure 15.