Installing The Switch Into A Rack (Hp System/E Rack) - HP StorageWorks 2/8-EL - SAN Switch Installation Manual

Installing the SAN Switch 2/8
Figure 22: Installing the switch into a rack (HP System/e rack)
7. Tighten the nuts installed in step a of step 4 on page 50.
Note: To uninstall a switch, remove the middle #10-32 x 1/2-inch Phillips pan head
screw with captive star lock washer from either side of the rack uprights.
SAN Switch 2/8 Version 3.1.x Installation Guide 55